How to put on and take off the prosthetic breast in a hot spring or bath.
There is a video of how to put on and take off the prosthetic breast at the following site.
We offer a wealth of images and videos such as before and after, mounting methods, and maintenance.
How to properly attach and remove the prosthetic breast.
Adhesive is used when taking a hot spring or bath. The “gel fit” on the back of the prosthetic breast cannot retain its adhesive strength when soaked in water.
1，Apply glue to the back of the prosthetic breast.
Apply glue around the back of the prosthetic breast. As a guide, the width is 2 to 3 cm.
The trick is to apply the silicone mounting agent evenly around the back side so that there are no cuts. If there is an unpainted area, water will enter between the prosthetic breast and the body.
2，Wear an prosthetic breast on the chest.
In the case of adhesive, it cannot be reattached unless it is removed with a remover. Position it firmly and press it against your chest to bond it. Then, press the prosthetic breast against the chest in order from the bottom of the prosthetic breast.
3，Prosthetic breast removal.
If you used glue, use a remover to remove it. Gently apply the remover to the back of the end of the prosthetic breast and peel it off.
Slowly and gradually remove the prosthetic breast from the chest using the remover.
5，Remove the prosthetic breast from the body.
Gently peel off with the removal liquid until the end.